Our main aim after the first winter in our new house was to make sure that we could warm our home and that we will never be so cold again. We already insulated under our living room floor, which helped keep in some of the heat, but we also decided that the 1950’s style gas fireplace in our living room had to go.
Not only did it not go with the style and period of the house, it also wasn’t safe. After much deliberation, we decided to replace it with an original Edwardian fireplace. Because of the quite significant costs involved, we also looked at reproduction fireplaces but these just weren’t as good as the originals.
If you have a new fireplace fitted, you have to use a HETAS registered company (they are the official body that approve solid fuel domestic appliances). Our local fitter also checked the chimney and chimney lining, to make sure that everything was safe and in order for our new fireplace. They also made sure, that everything complies with building regulations and registered our new fireplace with our council.
Our fitters were really friendly and quick. So quick in fact, that the old fireplace had gone before I could even take a picture! You can see our new slate hearth is already in place, too.
After a few more hours of work, this is what it looked like. We chose the tulip design on the tiles to match the tulips in our new stained glass windows.
As we live in a smoke control area, we are only allowed to burn approved fuels. This means that we can’t burn wood. To start with, we struggled lighting the coals. It takes a while for them to heat up and burn, but when they do, they give off a lot of heat. This is what the fire looked like last winter.
It’s such an improvement. Even if the rest of the house is still really cold in winter, we can at least heat the living room. It still sometimes takes us a few attempts to get the fire going, so if anyone has tips on lighting a coal fire, please share them with us.
*You can check out our complete guide to Restoring, Maintaining and Running a period fireplace here!*
Richard Robinson says
Hi Christine,
Many congratulations for everything you have done. We’ve lived with solid fuel open fires for a few years and here are my tips for hassle-free fire-lighting.
1. Clean out all the old ashes (beware, they can still be hot from the night before, so best left until afternoon.
2. Put down a layer of kindling in the centre of the grill (say 6-8 sticks)
3. Put a fire lighter on top of the kindling
4. Carefully arrange coals/smokeless ovoids around the firefighter
5. Light the fire lighter
6. Add the final coals/ovoids on top of the lit fire lighter without extinguishing the flame.
7. Be patient! It will take 10 mins for the kindling to catch, and 60 mins before you get real heat from the fire.
Hope this helps
R/
Christine says
Thanks for sharing those tips, Richard! That’s exactly how we used to light the fire after we got the hang of it (we currently don’t have a fireplace). The top-down method works so well, doesn’t it?
Cx
Lindsey says
Hi! Can you please tell me where you purchased the wooden surround? Is it also original or did you buy or build it? I would love one like this. Thanks so much!
Christine says
It’s an original surround that we bought at The Antique Fireplace Restoration Company. The guys there were really helpful, but I’d also recommend checking out local reclamation shops to find an original one.
Hope that helps, Lindsey!
Cx
Alison says
Hi both – lovely job you are dong! just a question re. chimney – I am getting conflicting advice from various HETAS engineers I have asked for quotes as to whether or not I need to line the chimney before installing a cast iron fireplace. Some say yes others no. Chimney sweep who checked it for me says its ready to go but now am not sure! did you have this problem?
Christine says
We had a load of conflicting advice, too. Basically it all depends on the condition of your chimney. If your chimney sweep says it’s okay, it probably is, as he’s not trying to sell you a flue liner. We heard that companies will try to sell you a liner whether you need it or not! Our chimneys were both in a decent condition and our open cast iron fireplace in the living room doesn’t have a liner. Our new wood burner in the dining room on the other hand does, because were advised, that the stove would work more efficiently with a flue liner. I doubt that a liner would effect the efficiency on an open fireplace though.
If you do decide to go for a flue liner, there are different types available. If you burn coal (as opposed to wood), it burns at a very high temperate and there are flue liners available that are more suited to that.
As long as you get the necessary HETAS certificate, it probably won’t matter which option you go for.
Hope that’s some help!
Cx